Wanpipe CallWeaver Configuration

Sangoma SMG/BRI Configuration/Operation

1. After successful SMG/BRI Installation the ./Setup script will prompt you to proceed with wanpipe/smg/bri configuration.
   -> Run: /usr/sbin/wancfg_smg
   

   The wancfg_smg script will proceed to configure each A500 BRI Port.
   The BRI configuration process is fully automated.
   
   

2. After wancfg_smg configures all the cards, you will have an option to Restart Wanpipe/SMG/BRI.
   The startup procedure is comprised of three steps:
   

   1. wanrouter start
   

   Starts all wanpipe A500 BRI ports
   Usage: wanrouter [start|stop|restart]

   2. smg_ctrl start
   

   Starts SMG/BRI daemons. (very similar to ztcfg step when working with zaptel)
   Usage: smg_ctrl [start|stop|restart]

   3. callweaver
   

   Start callweaver .
   Run: callweaver -r  to log into the CLI
   
   

3. At this point we are ready to write our Dial Plan in /usr/local/etc/callweaver/extensions.conf
   Callweaver will connect to the SMG daemon using a woomera channel driver.
   
   This is an example of /usr/local/etc/callweaver/extensions.conf
   
   

   ;Sangoma SMG Outbound context
   ;Place call on woomera channel to SMG/BRI
   ;==================================
   
   [outb]
   exten => _X.,1,noop
   exten => _X.,n,Dial(WOOMERA/g1/${EXTEN}|60|o)
   exten => _X.,n,Hangup
   
   ;Sangoma SMG Incoming Contexts
   ;Context name defined in /usr/local/etc/callweaver/woomera.conf
   ;====================================
   
   [sangoma]
   exten => _X.,1,noop
   exten => _X.,n,Playback(demo-congrats)
   exten => _X.,n,Hangup
   

   ;Early Media Example
   ;To play a file without answering the call
   
   [sangoma4]
   exten => _X.,1,noop
   exten => _X.,n,Playback(demo-congrats|noanswer)
   exten => _X.,n,Hangup
   

4. After we configured the CallWeaver Extensions file we are ready to restart CallWeaver and start making calls.