Wanpipe for Asterisk Configuration

1. Wanpipe LINUX Configuration wizard for Asterisk
   
   
2. Command line configuration for Asterisk (Recommended when using external GUI).  
3. Wanpipe Legacy Asterisk Configuration
   
   
4. Wanpipe Decoded Configuration Options

Wanpipe LINUX Configuration wizard for Asterisk / Zaptel /Dahdi
     
The wancfg_zaptel & wancfg_dahdi are utilities able to create full wanpipe config, zaptel/dahdi config and zapata/chan_dadhi config files. This utility will work for ALL Sangoma cards: A101/2/2d/4/4d/8d/200/400. For T1/E1 port wancfg_zaptel/wancfg_dahdi will ask few questions relating to front end configuration.  For Analog cards there are no questions asked configration is automatic. 
[Trixbox users Click Here ]

1. For Wanpipe/Dahdi/Asterisk Run:
   /usr/sbin/wancfg_dahdi 
   
   Based on your selections wancfg_dahdi configurator will create:
       1. /etc/wanpipe/ config files
       2. /etc/dahdi/system.conf files
       3. Optionally /etc/asterisk/chan_dahdi.conf files.
   ----
2. For Wanpipe/Zaptel/Asterisk Run:
   /usr/sbin/wancfg_zaptel  
   
   Based on your selections wancfg_zaptel configurator will create:
       1. /etc/wanpipe/ config files
       2. /etc/zapte.conf files
       3. Optionally /etc/asterisk/zapata.conf files. 
   ---
3. Once wancfg_zaptel/wancfg_dadhi is finished your environment will be fully configured and setup to work with asterisk.
   --
4. Proceed to write your dial plan based on
   /etc/dadhi/system.conf and /etc/asterisk/chan_dahdi.conf   (For DAHDI)
   or
   /etc/zaptel.conf &  /etc/asterisk/zapata.conf  (For Zaptel)
   
   --
5. End of Wanpipe/Zaptel/Dahdi configuration  
   --
6. To start wanpipe & asterisk run:
   
   1. wanrouter start             #starts all configured wanpipe ports 
   2. ztcfg  or dahdi_cfg        #configures zaptel/dahdi (usually done by above wanrouter start)
   3. safe_asterisk                #starts asterisk

Top