Wanpipe FreeBSD Drivers
- Current supported FreeBSD OS releases
- WANPIPE Driver supported features
- BETA Wanpipe Driver ................................... wanpipe-3.2.2.tbz
- Wanpipe Port Driver ................................... wanpipe-3.2.2-port.tar.gz
- Important FreeBSD Driver Announcements
- Imporant Hardware Announcements
- AFT Firmware Files & Update Instructions
Current supported FreeBSD OS Releases
The Wanpipe FreeBSD Driver supported FreeBSD-5.x/6.x releases.
The latest Wanpipe release provide first beta release for FreeBSD-7.x.
Supported features for Wanpipe Driver under FreeBSD OS
WAN Protocol Mode:
HDLC Streaming raw data
Cisco HDLC/Point-to-Point/Frame Relay protocol
TDM VoIP Mode:
Support Asterisk/Zaptel interface for Asterisk Software PBX application.
API Mode:
API mode is not supported right now.
BETA (AFT A101/2/2d AFT 104/4/4D A108/8D A200/A400 Wan & TDM Voice)
This release contains beta drivers for:
- AFT A108d 8 Port T1/E1 Board (with optional HW Echo)
- AFT A104d 2 Port T1/E1 Board (with optional HW Echo)
- AFT A102/A102d 2 Port T1/E1 Board (with optional HW Echo)
- AFT A101/A101d 1 Port T1/E1 Board (with optional HW Echo)
- AFT A200 Analog FXO/FXS HW Echo Cancellation Board.
- AFT A400 Extended Analog FXO/FXS HW Echo Cancellation Board.
- AFT A142/A144 Serial V35/RS232 Card
- AFT 56K DDS Card
- All S-Series Legacy Cards (except S518 ADSL card)
These drivers are relatively new and contain the latest features. After 2 to 3 months in the field, a beta release will be
deemed stable.
It is recommended to run this release if the hardware and driver features required are not yet considered STABLE.
FTP: ftp.sangoma.com/FreeBSD/wanpipe/
Change Log: Change Log
| 
